SysChat is a free online computer support community. Ask questions, share resources, contribute knowledge and discuss technology. Join our growing community to access all features. Register Now!

SysChat » General » General Tech Support » My PC cant boot nor enter setup.only shows d 1st screen wit(Press DEL 2enter setup)

General Tech Support

General technical discussion and troubleshooting help not covered in the topics above goes here.

Reply
 
LinkBack Thread Tools
  #1 (permalink)  
Old 04-28-2009, 12:46 PM
kaycee kaycee is offline
Member
 
About:
Join Date: Apr 2009
Posts: 76
kaycee is on a distinguished road

Default My PC cant boot nor enter setup.only shows d 1st screen wit(Press DEL 2enter setup)


Hello Friends. Please can one help me out. A desktop computer of mine would not boot into the GUI. If you switch it on it only shows the 1st screen you would see before you now see ('windows' and a progress bar). That is the screen where you see, press 'DEL' to enter setup and it just hangs there. When you even press the 'DEL' from the keyboard so you at least see the setup screen, it doesn't. Nothing just responds. Infact it shows that screen and stays like that 'wouldn't enter setup and wouldn't boot' please Can any one kindly help me. Thanks in anticipation. One can also reach me here. I'm sorry if it's not allowed.




Last edited by Sami; 04-29-2009 at 12:23 AM.. Reason: to remove email address
Reply With Quote
  #2 (permalink)  
Old 04-28-2009, 10:45 PM
lurkswithin's Avatar
lurkswithin lurkswithin is offline
Senior Member
 
About:
Join Date: Jan 2008
Location: Texas
Posts: 1,233
lurkswithin has a spectacular aura aboutlurkswithin has a spectacular aura aboutlurkswithin has a spectacular aura about

Default


Please edit your post and remove your email. It is really a bad thing to publicly display a person's email address.

Your problem is more than likely memory related. The first page or P.O.S.T. page is for identifying what hardware is installed and which is operational. Google for memtest86 and read how to make it a bootable application as to your computers configuration ...floppy or CD. Then boot to the program and run it. Any errors at all means the memory needs to be replaced. If the system still locks up then you may have to just swap out a memory module in order to get it to boot to the BIOS or to windows.



Reply With Quote
  #3 (permalink)  
Old 05-01-2009, 08:09 AM
kaycee kaycee is offline
Member
 
About:
Join Date: Apr 2009
Posts: 76
kaycee is on a distinguished road

Default My Pc cant boot nor enter setup


Thanks for your reply. Please could you let me know in detail how to use the 'memtest86' how do I put into the system? The computer only shows this screen with 'Press DEL to Enter setup' there's also 'BIOSTAT' written on the screen thanks also for ur advice 2 remove my email adres.but I couldn't do it besides I noticed it had been removed.



Reply With Quote
  #4 (permalink)  
Old 05-01-2009, 02:50 PM
lurkswithin's Avatar
lurkswithin lurkswithin is offline
Senior Member
 
About:
Join Date: Jan 2008
Location: Texas
Posts: 1,233
lurkswithin has a spectacular aura aboutlurkswithin has a spectacular aura aboutlurkswithin has a spectacular aura about

Default


Memtest86.com - Memory Diagnostic

You can download from the above link.
You will need either Nero or some other burning software to make the bootable CD.

Download the ISO image for creating bootable CD (Windows - zip) and unzip the contents to your desktop. It will be what is known as an ISO image file.
Open the burning software and click to burn an image file. the program will need to be pointed to the desktop and it will show the ISO file open the ISO and the burning software will auto produce a bootable CD with memtest86 application installed.
1) make sure the CD/DVD drive is set for first boot from within the BIOS (set-up)
2)Insert th CD in the CD/DVD drive and restart the computer.
3) when prompted to boot to CD, hit enter.
4) follow the prompts to start the program and let it run for minimum of 12 hours or more...unless errors are shown almost immediately .

Any errors means the memory stick is bad and will need to be removed/replaced.



Reply With Quote
  #5 (permalink)  
Old 05-01-2009, 06:24 PM
kaycee kaycee is offline
Member
 
About:
Join Date: Apr 2009
Posts: 76
kaycee is on a distinguished road

Default My PC cant enter BIOS setup nor boot into windows


Thanks for your replies. How do I get to the bios setup screen cos it doesn't display it. How do I set boot order when it never shows bios setup screen. I could burn the memtest86 on a disc using nero on another PC. But How can I browse for it on the troubled PC since it doesn't show any other screen other than (Press DEL to enter setup). Again,please what do you refer to as the memory stick in your reply? Is it the RAM?. Thanks



Reply With Quote
  #6 (permalink)  
Old 05-02-2009, 07:54 AM
lurkswithin's Avatar
lurkswithin lurkswithin is offline
Senior Member
 
About:
Join Date: Jan 2008
Location: Texas
Posts: 1,233
lurkswithin has a spectacular aura aboutlurkswithin has a spectacular aura aboutlurkswithin has a spectacular aura about

Default


Yes, burn the memtest from another computer and boot to it with the damaged one to see if it will....can't hurt.

By pressing DEL...you enter set-up.....set-up is the BIOS area of the computer.

Memory is the installed RAM stick(s).



Reply With Quote
  #7 (permalink)  
Old 05-03-2009, 12:34 AM
kaycee kaycee is offline
Member
 
About:
Join Date: Apr 2009
Posts: 76
kaycee is on a distinguished road

Default


Thanks a lot. I do get you fully now and the processes you described. But the ultimate problem is this, when you press 'DEL' it doesn't enter BIOS setup area so at least you set boot device. It just stays like that. I thought the memtest86 would only boot up when the screen ''Press any key to boot from cd has shown''.i appreciate you efforts. Of course I would try and see if the memtest86 would force the PC to boot from cd or enter setup. Have a good time



Reply With Quote
  #8 (permalink)  
Old 05-03-2009, 06:24 AM
mhookem's Avatar
mhookem mhookem is offline
Moderator
 
About:
Join Date: Dec 2006
Location: Chesterfield, UK
Posts: 387
mhookem will become famous soon enoughmhookem will become famous soon enough

Default


Hello, try hitting DEL as soon as you start to see the boot sequence. Keep pressing it and you should catch it before it freezes.
Also, if you are trying to test your memory and you get to the setup screen, you might find that you can set the bios to show memory testing during the boot sequence.
If you've got the option, it will be something called or similar to a diagnostic boot.

regards

Martin



Reply With Quote
  #9 (permalink)  
Old 05-04-2009, 05:29 AM
kaycee kaycee is offline
Member
 
About:
Join Date: Apr 2009
Posts: 76
kaycee is on a distinguished road

Default


Thanks brother. I think I'd done that. But I'd try it again, this time being smarter in pressing the DEL key. If it fails then I think I'd start talking about changing the motherboard or wouldn't that be the likely thing causing this problem? Thanks a lot.



Reply With Quote
Reply





Similar Threads
Thread Thread Starter Forum Replies Last Post
Black Screen on XP with dual boot Graeme Operating Systems 1 03-01-2009 09:31 AM
boot device screen is blank blacktide111 General Tech Support 1 08-10-2008 04:57 PM
Vista Dual Boot Black Screen gsparx Operating Systems 2 07-26-2008 09:58 PM
XP Boot screen Firefox Operating Systems 1 04-18-2007 07:09 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is on
Smilies are on
[IMG] code is on
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are on



» Ads



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54