View Single Post
  #4 (permalink)  
Old 01-01-2007, 01:05 PM
DOSman710 DOSman710 is offline
Junior Member
 
About:
Join Date: Jan 2007
Posts: 2
DOSman710 is on a distinguished road

Default


Try looking on the label on top of the drive. It should say something about a jumper for the master/slave setting. That jumper is usually found on the back of the drive, but on rare occasions it could be on the bottom of the drive, on it's little logic board. If there's no setting then the drive is probably a cable select drive.



Reply With Quote